Bosch GHG 23-66 Professional Notice Originale page 16

16 | Français
If you are using solder without flux, apply soldering grease or
paste to the solder joint. Heat the solder joint and apply the
solder. The solder must be melted by the temperature of the
workpiece.
If necessary, remove the flux after the solder joint has cooled
down.
Heat-shrinking (see figure G)
Fit the reflector nozzle (17) (accessory). Choose the dia-
meter of the heat shrink plastic tube (21) (accessory) suit-
able for the workpiece. Evenly heat the heat shrink plastic
tube until it fits closely against the workpiece.
Maintenance and Service
Maintenance and Cleaning
Pull the mains plug out of the plug socket before car-
u
rying out any work on the heat gun.
Keep the heat gun and the ventilation slots clean in or-
u
der to work safely and well.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The heat gun, accessories and packaging should be sorted
for environmentally friendly recycling.
1 609 92A 7NG | (14.06.2022)
Do not throw heat guns in the household waste!
Only for EU countries:
According to European Directive 2012/19/EU on waste
electrical and electronic equipment and the implementation
thereof in national law, heat guns that are no longer service-
able must be collected separately and sorted for environ-
mentally friendly recycling.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Only for United Kingdom
According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113), heat guns that are no longer
usable must be collected separately and disposed of in an
environmentally friendly manner.
Français
Consignes de sécurité
Lisez attentivement toutes les instructions
et consignes de sécurité. Le non-respect des
instructions et consignes de sécurité peut pro-
voquer un choc électrique, un incendie et/ou
entraîner de graves blessures.
Conservez tous les avertissements et toutes les instruc-
tions pour pouvoir s'y reporter ultérieurement.
Ce décapeur thermique n'est pas
u
prévu pour être utilisé par des en-
fants ni par des personnes souf-
frant d'un handicap physique, sen-
soriel ou mental ou manquant d'ex-
périence ou de connaissances. Ce
décapeur thermique peut être uti-
lisé par des enfants (âgés d'au
moins 8 ans) et par des personnes
souffrant d'un handicap physique,
sensoriel ou mental ou manquant
d'expérience ou de connaissances,
à condition qu'ils soient sous la
surveillance d'une personne res-
Bosch Power Tools