afx light CLUB-710-IP Manuel D'utilisation page 3

• The product is for decorative purposes only and not suitable as a household room illumination.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
• The lenses, housing or ultraviolet filter must be replaced if they are visibly damaged.
• Please note that the lamp of this device cannot be replaced. If the lamp is faulty, the unit must
be discarded
DISCONNECT DEVICE
Please note that the unit DOES NOT have an ON/OFF switch. Please unplug the unit to remove
completele the power from the internal circuits before cleaning or servicing. Therefore, the discon-
nect device shall remain readily accessible.
INSTALLATION
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly
fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10 times of the unit's weight.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety rope.
Never stand directly below the device when mounting, removing or servicing the fixture.
POWER SUPPLY AND SIGNAL CABLE CONNECTION
DMX IN
POWER IN
Signal (-)
Signal (+)
1. Mains Power connection
The exclusive plug should be used between the connection of unit and power. Please ensure that the
rated voltage and frequency are accordance with the power supply. The required input voltage and
frequency are: 100-240V~ 50/60Hz
We suggest that every light has an independent switch so that you can turn on or turn off the light
randomly.
Note: the ground wire (yellow/green double-colour wire) must be safely connected, the electrical installation must be in accordance with the
related standards
CAUTION: When installing the device, make sure there is no highly inflammable material within a
distance of min.5m!
2 1
Ground
3
DMX512 OUT DMX512 IN
www.afx-light.com
Signal (-)
Signal (+)
12
3
120
3 EN