Publicité
Les langues disponibles
Les langues disponibles
Charging TEMPERATURE of the battery is between 0ºC and 45ºC.
DO NOT EXPOSE the battery charger to rain or wet conditions. Keep it clean and dry.
CLEAN carefully the contacts of the charger with a clean and dry cloth in case they get dirty.
The charger must be STORED in a dry place and away from the direct sunlight.
NEVER use the charger over flammable materials or in explosive environments.
NEVER use the charger down the direct sunlight neither at temperatures below 0ºC.
NEVER force the plug of the charger, it must fit smoothly in the power point.
NEVER use any plug adaptor.
KEEP the charger away from children.
KEEP the power cable and the charging cable clean and avoid them to contact with oils or corrosive
substances.
KEEP the power cable and the charging cable away from cutting edges.
NEVER use the cable neither the plug to carry the charger.
3.9 TOOL USE AND CARE
USE clamps or other practical way to secure and support the work piece to a stable platform.
DO NOT FORCE the tool.
USE the correct tool for your application. The correct tool will do the work in a better and safer way.
DO NOT USE the tool if the switch does not turn it on neither off.
DISCONNECT the battery before making any adjustments, changing accessories, or storing the tool.
STORE idle tools out of reach of children and other untrained persons.
MAINTAIN tool with care.
CHECK for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the tools operation. If damaged, contact the technical service or an authorized dealer before
using again.
USE only accessories that are recommended by the manufacturer for your model.
4.
SPECIFIC SAFETY RULES
1.-
2.-
3.-
4.-
5.-
6.-
7.-
8.-
9.-
10.- The acoustic power level of these machines could be a risk for health (see characteristics sheet,
11.- The hand-arm vibration level of these machines could be a risk for health (see characteristics
FURTHERMORE, THE OPERATOR IS COMPELLED TO RESPECT ADDITIONAL REGULATIONS ENFORCED
"TORNADO E-BATT" BATTERY VIBRATING SCREED
For the proper use of this device, please assure that the operator has been correctly informed
of the content of this manual before using it.
This screed must be used only under the applications for which it has been designed and
according to these safety instructions.
Do not touch any part of the vibrating group when the motor is running.
Do not work in an area exposed to flammable liquids or gases.
Do not allow inexperienced or not trained personnel to use the screed alone.
Always keep the vibrating screed clean and dry.
Please secure all the threads and bolts before working.
Do not stop the screed until the concrete mass is fully vibrated.
Do not work with the screed if any type of malfunction, even small, has been observed.
point 2.2). Proper protective equipment must be used.
sheet, point 2.2). The screed must always be handled using isolated gloves and all the
necessary safety equipment. Besides, the user must rest each hour of effective work.
The rubber parts used for isolating from vibration must be maintained in perfect shape. In case
of damage, they must be replaced immediately.
en
9
Publicité
