K SEEK –/+ buttons
CD/MD*
1
/USB*
3
:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L Receptor for the card remote
commander
M MODE button 8, 10, 12
To select the radio band (FM/AM); select the
SAT tuner band (mode)*
select the play mode*
N DSPL (display)/DIM (dimmer) button
8, 9
To change display items (press); change the
display brightness (press and hold).
O RESET button (located behind the front
panel) 4
P Number buttons
CD/MD*
1
/USB*
3
:
(1)/(2): GP*
/ALBM*
6
To skip albums (press); skip albums
continuously (press and hold)*
(3): REP 8, 10
(4): SHUF 8, 10
(6): PAUSE*
9
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Q SCRL (scroll) button 8, 9
To scroll the display item.
R AUX input jack 11
To connect a portable audio device.
2
; select the unit*
4
;
5
.
–/+
7
8
.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
ql < (.)/, (>) buttons
To control CD/radio/MD/USB, the same as
(SEEK) –/+ on the unit.
w; VOL (volume) +/– button
To adjust volume.
wa ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
ws SEL (select) button
The same as the select button on the unit.
wd M (+)/m (–) buttons
To control CD, the same as (1)/(2) (GP/
ALBM –/+) on the unit.
wf Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When the SAT tuner is connected.
*3 When a USB device is connected.
*4 When a CD/MD changer is connected.
*5 When an ATRAC Audio Device is connected.
*6 When an ATRAC CD is played.
*7 When an MP3/WMA/AAC is played.
*8 If the changer/USB device is connected, the
operation is different, see page 12.
*9 When playing back on this unit.
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless (SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 15.
About USB cap
When not using the USB terminal (G), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
7