MSI K8NGM-VH Mode D'emploi page 15

MSI Reminds You...
If you do not want to connect to the front audio header, pins 5 & 6, 9 & 10 have to be jumpered in order
to have signal output directed to the rear audio ports. Otherwise, the Line-Out connector on the back
panel will not function.
Front USB Connector: JUSB1/JUSB2
T he mainboard provides two standard USB 2.0 pin headers
JUSB1&JUSB2. USB2.0 technology increases data transfer
up to a maximum throughput of 480Mbps, which is 40 times f
than USB 1.1, and is ideal for connecting high-speed USB interfac
digital cameras, MP3 players, printers, modems and the like.
MSI Reminds You...
Note that the pins of VCC and GND must be connected correctly, or it may cause some damage.
Serial Port Connector: JCOM1
The main board offers one serial port COM1. It is 16550A high speed
communication port that sends/receives 1
serial mouse or other serial device directly to it.
Chassis Intrusion Switch Connector: JCI1
T his connector is connected to 2-pin connector chassis switch. If the
Chassis is open, the switch will be short. The system will re
must enter the BIOS setting and clear the status.
2 1 0
1
9
6 bytes FIFOs. You can attach a
(2)VCC
rate (1)VCC
aster
e peripherals such as USB HDD,
cord this status.
9
USB1+
USB1- GND
USB0C(10)
Key(9)
GND
USB0-
USB0+
1 2
SOUT
GND
RTS
RI
9 10
GN D
2
C I NT RO
1
To clear the warning,
SIN
DTR
DSR
CTS
KEY
you