Publicité
Les langues disponibles
Les langues disponibles
TIPS ON HOW TO GET THE BEST RESULTS
NOZZLE/ACCESSORY
USE FOR:
3in1 accessory tool*
3 tools in 1:
1. Dusting tool for hard surfaces (bookshelves, skirting boards etc).
2. Upholstery tool for textiles (curtains, upholstery etc).
3. Crevice tool for narrow spaces (behind radiators etc).
Turbo nozzle*
Carpet nozzle:
• Brushes and vacuums at the same time (best pick up of hair, fibres etc).
• Brush roller is driven by the airflow of the vacuum cleaner.
• Not suitable for carpets with very deep piles and long fringes, anti-slip carpets like door mats or
water resistant carpets. Use universal nozzle instead.
ParkettoPro nozzle*
Hard floor nozzle:
• For gentle cleaning of hard floor (parquet, wooden floor, tiles etc).
• Best dust pick up on hard floor with crevice.
Universal nozzle:
PrecisionFlow nozzle*
• For all floor types, secures best dust pick up on both carpets and hard floors.
• Change nozzle setting with the pedal. Icon will show recommended floor type.
Mini turbo nozzle:
Mini Turbo nozzle*
• Brushes and vacuums at the same time.
• For textile furniture, car seats, mattresses etc.
• Brush roller is driven by the airflow of the vacuum cleaner.
• Not suitable for carpets with very deep pile and long fringes as it can get stuck in the rotating
brush roll.
Upholstery nozzle:
Upholstery nozzle*
Use the upholstery nozzle for sofas, curtains, lightweight fabrics etc. Reduce suction power if necessary.
Models with manual power regulation – follow graphics on cleaner for optimal performance.
TROUBLESHOOTING
PROBLEM
SOLUTION
• Check that the cable is connected to the mains.
The vacuum cleaner
• Check that the plug and cable are not damaged.
does not start
• Check for a blown fuse.
The s-bag® indicator
• Check if the s-bag® is full or blocked.
light is illuminated
• If you have already changed the s-bag®, change the motor filter.
The cleaner might be overheated: disconnect it from the mains; check if the nozzle, tube, hose or filters
The cleaner stops
are blocked. Let the cleaner cool down for 30 minutes before plugging it in again.
If the cleaner still does not work, contact an authorized AEG service centre.
• Check if the s-bag is full or blocked.
• Check if the motor filter is clogged and needs changing.
Reduction of suction
• Check if nozzle is blocked and needs to be cleared.
capacity versus
• Check if hose is blocked by squeezing it gently. However, be careful in case the obstruction has
normal
been caused by glass or needles caught inside the hose.
Note: The warranty does not cover any damage to the hose caused by cleaning it.
Water has been
It will be necessary to replace the motor at an authorized AEG service centre.
sucked into the
Damage to the motor caused by the penetration of water is not covered by the warranty.
vacuum cleaner
For any further problems, contact an authorized AEG service centre.
DE
DE
DE
GB
GB
GB
ES
ES
ES
PT
PT
PT
FR
FR
FR
NL
NL
NL
IT
IT
IT
FA
FA
FA
Publicité
