AEG X POWER VX7 Manuel D'instructions page 16

DE DE DE
GB GB GB
ES ES ES
PT PT PT
FR FR FR
NL NL NL
IT IT IT
FA FA FA
HOW TO USE THE VACUUM CLEANER
Open the dust compartment cover. Check
that the dust bag (s-bag) is in place.
Insert the hose into the cleaner (to remove
it, press the lock buttons and pull). Insert
the hose into the hose handle until the lock
button clicks (to release it, press the lock
button and pull).
Attach the telescopic tube to the nozzle.
Attach the telescopic tube to the hose
handle (to remove it, press the lock button
and pull). Adjust the telescopic tube by
holding the lock with one hand and pulling
the handle with the other hand.
START/STOP THE VACUUM CLEANER
AND ADJUST SUCTION POWER
Pull out the power cord and plug it into the
mains. Press the ON/OFF button to turn the
cleaner on/off.
Adjust suction power. Turn the rotary knob
on the cleaner or use the air valve on the
handle.*
After cleaning, push the REWIND button to
rewind the cable.
PARKING POSITIONS
Use parking position underneath (A) to
carry and store the cleaner. At the back (B)
when you pause (save your back).