Eurocave 6000 Serie Mode D'emploi page 31

Your EuroCave Professional cabinet was designed to be adaptable. Its storage equipment adapts to your requirements and can be added to over
time.
Different types of storage
Standard storage equipment
Universal storage
shelf
Ref.: AXUH
Capacity: 77 bottles
Max weight: 100 kg
Champagne sliding
shelf
Ref. : ACHH
Capacity: 10 bottles
Display shelf
Ref.: ACPH
Capacity: 22 bottles
Storage equipment available as an optional extra (equipment "PLUS")
Universal storage
shelf
Ref.: AXUH2B
Ref.: AXUH2W
Capacity: 77 bottles
Max weight: 100 kg
The layout of your cabinet can be modified according to your requirements. Refer to pages 162-164 to see storage simulations.
1- A white marker pen is supplied in the accessories bag. It allows you to write on the shelf labels ("PLUS" equipment) in order to identify your bottles. 2- glossy black front 3- light wood front
We strongly recommend that you do not leave your wine bottles:
- Wrapped in tissue paper inside your EuroCave wine cabinet. Tissue paper does not tolerate ambient humidity in the long-term. The saturated
paper will stick to your bottle labels and damage them.
- Stored in cardboard packaging or a wooden case in your EuroCave wine cabinet, in order to encourage maximum air flow around the bottles
and prevent the packaging from deteriorating, which could eventually contaminate your wine bottles.
Layout advice
Your EuroCave Professional wine cabinet has been designed to safely hold
a maximum number of bottles. We recommend that you observe the
following advice to optimize loading.
•
Distribute your bottles as uniformly as possible over the
various cabinet shelves, in order to spread the weight. Also
ensure that none of the bottles is touching the rear wall of
the cabinet.
•
Spread the load over the entire cabinet rather than
placing bottles all at the top or all at the bottom.
•
Observe the loading instructions for the specific storage
layout of your cabinet and never stack bottles on a sliding
shelf.
•
If you have sliding shelves, it is preferable to position
them in the upper section of your cabinet to facilitate daily
access.
Note: adjusting an ACMS/ACHH sliding shelf
When you purchase your cabinet, the sliding shelves are already adjusted
to ideally suit the internal dimensions of your appliance. If you purchase
a new sliding shelf, you may have to carry out this adjustment. To do so,
unscrew the screws 1 of the first right or left runner 2 (2 screws) then
position the runner at the desired width and tighten the screws. Repeat
this process for the second runner (if necessary).
5/ LAYOUT – STORAGE
1
2
3
Bordeaux
storage shelf
Ref.: AXBH
Capacity: 78 bottles
Max weight: 100 kg
Articulated
presentation kit for
ACMS shelves
Ref.: AOPRESAR
Capacity: 32 bottles
Universal sliding
shelf fitted with
bottle supports for
presentation
Ref.: ACMS2B
2
Ref.: ACMS2W
3
Capacity: 12 bottles
•
In the same way, place one or two bottles of each of your
different wines on the sliding shelves and keep spare
bottles on the storage shelves. You then simply replace
bottles when they are consumed.
•
When using your wine cabinet, never pull out more than
one sliding shelf at a time.
NB: Never modify the position of the stiffener in your cabinet
(see description page 6) without first consulting your retailer
and never handle this part when the cabinet is loaded.
2
1
Universal sliding shelf
fitted with
"Main du sommelier"
supports
Ref.: ACMS
Capacity: 12 bottles
Serving sliding shelf
Ref.: ACVH
Capacity: 20 bottles
Articulated
presentation kit for
ACMS2 shelves
Ref.: AOPRESAR2
Capacity: 32 bottles
2
11
GB