Smartwares RM218 Mode D'emploi page 6

6. Function: Gives a warning when smoke caused by a fire is
detected.
7. Description: Smoke alarm device based on the photocell
principle, which means that the alarm monitors the air for
smoke caused by fire. smoke alarm device does not detect
heat, gas or fire.
8. Advice: Keep these instructions in a safe,
easily accessible place.
9. Caution: The alarm is designed in order to detect smoke; it
cannot prevent a fire.
10. Caution: The smoke alarm device should not be painted.
Protect the smoke alarm device from dust during renovation
work.
11. Caution: The smoke alarm device should not be
taped/covered (this causes loss of functionality).
12. Caution: Keep the smoke alarm device out of the reach of
children.
Press test button (1) and hold it for above 5 seconds until LED
lights, and release it within 1 second, the unit will generate a
"beep" indicates that it is activated and goes into work status.
CAUTION: Activate smoke alarm first or else there is no function
for this unit.
Test the unit to ensure proper operation by pressing the test
button, this will sound the alarm if the electronic circuitry, horn,
and battery are working. If no alarm sounds, there is a defective
battery or other failure.
ACTIVATION
TESTING
-5-