Preventive Maintenance - Smartwares RM218 Mode D'emploi

Testing
The smoke alarm device is provided with a test button. Push it in
until the alarm sounds. The signal stops when the button is
released. Test the alarm at least once a week.
Cleaning
For the best performance, the smoke alarm device must be
dusted once a month and vacuumed every 6 months. Remove the
detector from the ceiling plate and carefully vacuum the detector.
Do not touch the inside with the nozzle of the vacuum cleaner.
Then test the alarm.
Caution : The smoke detector loses its effectiveness if it is
covered.
Warning : The smoke alarm device should not be painted /
taped. Do not test the smoke alarm device with
candles, flames, cigarettes, etc.
IMPORTANT INSTRUCTIONS IN CASE OF FIRE ALARM
A smoke alarm device is part of your fire protection together with fire
extinguishers, escape ladders, ropes as well as your choice of
building materials during renovations. Also make sure that there is
an escape route; discuss this with your children, make sure any room
can be evacuated without opening the door,

PREVENTIVE MAINTENANCE

-9-
>>>