Axis D2110-VE Manuel D'installation page 4

Read this first
Read through this installation guide carefully before
you install the product. Keep the installation guide
for future reference.
Legal considerations
Radar surveillance can be regulated by laws that
vary from country to country. Check the laws in your
local region before using this product for surveillance
purposes.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of
any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and fitness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of
the patents listed at axis.com/patent and one or more
additional patents or pending patent applications in
the US and other countries.
Equipment modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modifications will invalidate all
applicable regulatory certifications and approvals.
Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX
are registered trademarks of Axis AB in various
jurisdictions. All other trademarks are the property
of their respective owners.
Regulatory information
Europe
This product complies with the applicable CE marking
directives:
•
Electromagnetic Compatibility (EMC) Directive
2014/30/EU. See Electromagnetic compatibility
(EMC) on page 4.
•
Radio Equipment Directive (RED) 2014/53/EU. See
Radio transmission on page 5.
•
Low Voltage Directive (LVD) 2014/35/EU. See
Safety on page 6.
•
Restriction of Hazardous Substances (RoHS)
Directive 2011/65/EU and 2015/863, including any
amendments, updates or replacements. See .
A copy of the original declaration of conformity
may be obtained from Axis Communications AB. See
Contact information on page 6.
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
•
Radio frequency emission when installed
according to the instructions and used in its
intended environment.
•
Immunity to electrical and electromagnetic
phenomena when installed according to the
instructions and used in its intended environment.
USA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
and
2. this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested using an unshielded
network cable (UTP) and found to comply with the
limits for a Class A digital device, pursuant to part 15
of the FCC rules. This equipment has also been tested
using a shielded network cable (STP) and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own expense.
Contact information
Axis Communications Inc.
300 Apollo Drive
Chelmsford, MA 01824
United States of America
Tel: +1 978 614 2000
Canada
This digital apparatus complies with
CAN ICES-3 (Class A). The product shall be
connected using a shielded network cable (STP) that
is properly grounded. Cet appareil numérique est
conforme à la norme CAN NMB-3 (classe A). Le produit
doit être connecté à l'aide d'un câble réseau blindé
(STP) qui est correctement mis à la terre.
Europe
This digital equipment fulfills the requirements for RF
emission according to the Class A limit of EN 55032.
The product shall be connected using a shielded
network cable (STP) that is properly grounded. Notice!
This is a Class A product. In a domestic environment
this product may cause RF interference, in which case
the user may be required to take adequate measures.
Australia/New Zealand
This digital equipment fulfills the requirements
for RF emission according to the Class A limit of
AS/NZS CISPR 32. The product shall be connected
using a shielded network cable (STP) that is properly
grounded. Notice! This is a Class A product. In a