Axis D2110-VE Manuel D'installation page 15

12. Pull the network cable back slightly so that the cable gasket adjusts itself on the cable.
CAUTION
Risk of water leaks. If the cable gasket is not correctly adjusted on the cable water can
seep in and damage the product.
13. Put back the cable gasket.
14. If connecting an auxiliary device, for example an I/O, repeat the step above as applicable
to the specific device. If more than one cable is used, each cable must be routed through
a separate cable gasket.
1
Network
2
PoE out to network device
3
Power
4
I/O
5
Ground/Relay
15. To use a cable gland with strain relief, assemble it as shown below. Tighten the nut
and cap firmly by hand.
CAUTION
Risk of water leaks.
• Only pull one cable through the cable gland.
AXIS D2110-VE Security Radar
15
EN