Axis D2110-VE Manuel D'installation page 17

16.8 Fasten the cover with the screw.
1
Screw
2
Cover
3
Screw
4
Strain relief
5
Relay connector
6
Grounding screw
7
Cable shoe
8 Washer
17. Connect external devices to the radar.
18. Connect the network cable.
19. If you are not using PoE, connect the DC power.
CAUTION
Risk of damage to the device. Do not power the device with both PoE and DC.
20. Make sure that the LEDs indicate the correct condition. See LED indicators on page 22.
21. Pull out the strut and close the cover.
22. Tighten the four screws with 1 N m (0.7 lb ft) torque.
Find the device on the network
To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility
or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support.
For more information about how to find and assign IP addresses, go to
How to assign an IP address and access your device.
AXIS D2110-VE Security Radar
17
EN