Axis D2110-VE Manuel D'installation page 25

Power connector
2-pin terminal block for DC power input. Use a Safety Extra Low Voltage (SELV) compliant limited
power source (LPS) 8–28 V DC with a rated output power limited to ≤100 W.
CAUTION
Risk of damage to the device. Do not power the device with both PoE and DC.
Relay connector
CAUTION
Use single core wires for the relay connector.
Function
Type
Rating
Isolation from other circuitry
Intrusion alarm switch
Use the intrusion alarm switch to get a notification when someone opens the device's housing. To
set up an action rule, see the user manual available at axis.com.
AXIS D2110-VE Security Radar
Specifications
Normally open
24 V DC/5 A
2.5 kV
25
EN