10
6.2
Installing and charging the batteries (see P3)
Place the 2 supplied batteries into the battery compartment with the
polarity markings as shown. Use only the NiMH rechargeable battery
type provided.
Position the battery compartment cover over the batteries and slide
up to click into place.
Put the handset on the base and charge for 15 hours before using
the handset for the first time. The handset will give a beep when it is
properly placed on the base or charger.
7
USING YOUR PHONE
7.1
Introducing Bluetooth
Your new telephone system with Bluetooth wireless technology allows
you to pair and connect a Bluetooth enabled mobile phone with the
telephone base, so that you can benefit from the ease and comfort of
your home telephone system to receive your mobile phone calls, or
make a call through your mobile phone plan to its last dialled number.
IMPORTANT INFORMATION
Refer to your mobile phone user's guide for more information about
its Bluetooth function.
Make sure that your Bluetooth enabled mobile phone is between
one to 2 m away from the telephone base in order to maintain a clear
and consistent connection between your Bluetooth mobile phone
and telephone base.
Make sure that your Bluetooth enabled mobile phone has sufficient
signal strength. You may need to move the Bluetooth enabled
mobile phone and telephone base to a location where the mobile
signal may be stronger.
Charge your Bluetooth mobile phone while it is connected to the
telephone base because your mobile phone's battery will discharge
faster while it is connected wirelessly to the telephone base.