Pelgrim COM316 Serie Mode D'emploi page 37

BEFORE USE
2
4 4
3
1. Mounting the brackets:
▷ Place the bracket against the groove of the hook.
▷ Push the rail bracket backwards.
Move down the rail bracket into the bottom of the groove hook.
▷
Important!
Be aware of the right positing of the bracket in the hooks. Wrong installing of the
bracket will result in sparks in the oven!
Locking function
The accessories can be pulled out approximately halfway until they lock in place. The locking
function prevents the accessories from tilting when they are pulled out. The accessories must be
inserted into the cavity correctly for the tilt protection to work properly.
2. When inserting the wire rack, ensure the wire rack is onto the right facing direction.
3. When inserting the backing tray, ensure the backing tray is onto the right facing direction.
1
2
3
1
EN 11