Publicité
Les langues disponibles
Les langues disponibles
Celsius/Fahrenheit Toggle Button
The temperature can be displayed in either Celsius or Fahrenheit. Press the
toggle between the two options.
3s
SAFETY LOCK
+
Press the
UP and
3s
mode, the controller is disabled and the spa retains all previous settings.
SPECIFICATIONS
Dynamic mode
Static Color
PWM Grade
Brightness Grade
Speed Grade
Demo mode
Direct Color Select
Output Colo Switchable
Working Voltage
Output Current
Remote frequency
Remote distance
OPERATION
Using Remote Controller
Pull out the battery insulating tape before using. Install button batteries (not included).
Switch Color Sequence
If the direct color button doesn't match output LED light, follow below steps to adjust the light sequences:
1. Unplug the light strip. Plug it back after 5 seconds.
2. Press RED and BLUE button together and hold for 5 seconds. With this operation, the output light sequence will
switch between 6 possible combinations.
FUNCTIONALITY
1. Turn On / Standby
Press the button to turn on the light strip or switch to standby mode. When being powered on, the light strip will automatically
turn on and restore to the previous state.
2/9. Dynamic Mode Adjust
Switch to dynamic mode from static color, or switch between dynamic modes.
3/10. Dynamic Speed Adjust
Adjust the dynamic playing speed. The light will switch to dynamic mode If press this button at static color mode.
4/5. Static Color Adjust
Switch to static color mode from dynamic mode, or switch between static colors.
6. Direct Color Select
Select static colors directly. When press the specific color button, light strip will play the same static color. The direct colors are
included in "COLOR+" and "COLOR- "operation.
7/8. Brightness Adjust
Adjust static color brightness. The light will switch to static color mode If press this button at dynamic mode.
11. Demo Mode
Press this button will switch to Demo mode. At demo mode, it plays 17 dynamic modes in loop, each mode repeats 3 times.
DOWN buttons at the same time for 3 seconds to lock/unlock the controller. In safety lock
LED LIGHT STRIP OPERATION
21 modes
20 colors
256 levels
5 levels
10 levels
Yes
Yes
Yes, 6 options
DC 5~24V
3x4A peak, 3×2A constant
433.92MHz
>15m at open area
1
2
3
4
5
6
13
DOWN button for 3 seconds to
11
10
8
7
9
Publicité
