Abus FU 8211 Instructions D'installation page 61

FU8200, FU5200
FU8220, FU8230
FU8300, FU8310
Uses 2 channels
FU8305
Uses 1 channel
FU8320/1/5, FU5120 / FU5121, FU8430/5
Uses 2 channels (Reed contact+tamper or Alert
+tamper ext. contact)
OP1=Alert, OP2=Tamper or OP3= Alert,
OP4=Tamper. Also can be 2+3
FU8330
OP1=Alert, OP2=Tamper or OP3= Alert,
OP4=Tamper. Also can be 2+3.
FU8340
Uses 2 channels. Only the "alert channel" will
respond no tamper exists.
OP is permanent switched, have to be reset
through e. g. manually switching in user menu!!!
FU8350, FU8370, FU8380, FU5110
OP1=Alert, OP2=Tamper or OP3= Alert,
OP4=Tamper. Also can be 2+3
FU8390
Uses 1 channel
FU84xx FTSE 96, FU8420 / FU8421 / FU8422
FU8130 / FU8140
OP1=Alert, OP2=Tamper or OP3= Alert,
OP4=Tamper. Also can be 2+3
No distinction between cullet lever and the alarm
bit always is sent.
Seite 2 von 4
No No
No No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes