Hilti NURON C 4-22 Mode D'emploi page 14

Storage
▶ Always store this product with the electric supply cable unplugged from
the electricity supply.
▶ Store this product in a dry place, where it cannot be accessed by children
or unauthorized persons.
▶ After a long period of storage, always check all visible parts and controls
for signs of damage and make sure that they all function correctly.
8 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, contact Hilti Service.
Malfunction
LED doesn't light.
9 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as
household waste!
10 FCC statement (applicable in US) / IC statement (applica-
ble in Canada)
This device complies with Part 15 of the FCC Rules and RSS-210 of lC.
Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
10 English
Possible cause
Supply cord not con-
nected to electricity sup-
ply.
Product malfunction.
Supply cord faulty.
The charger is defective. ▶ Have the product
Action to be taken
▶ Plug the supply cord
into the power outlet.
▶ Unplug the product
and then plug it
back in. If the LED
remains off, consult
Hilti Service.
▶ Replace the supply
cord. → page 8
repaired by Hilti
Service.
2275226
*2275226*