Important Safety Instructions and Precautions
WARNING: DO NOT CONNECT DIRECTLY TO THE PUBLIC SWITCHED
TELEPHONE NETWORK (PSTN). ANY CONNECTION OF THIS PHONE
TO AN OFF PREMISE APPLICATION, AN OUT OF PLANT APPLICATION,
ANY OTHER EXPOSED PLANT APPLICATION, OR TO ANY EQUIPMENT
OTHER THAN THE INTENDED APPLICATION MAY RESULT IN A SAFETY
HAZARD, AND/OR DEFECTIVE OPERATION, AND/OR EQUIPMENT
DAMAGE. ‚"EXPOSED PLANT" MEANS WHERE ANY PORTION OF THE
CIRCUIT IS SUBJECT TO ACCIDENTAL CONTACT WITH ELECTRIC
LIGHTING OR POWER CONDUCTORS OPERATING AT A VOLTAGE
EXCEEDING 300 V BETWEEN CONDUCTORS OR IS SUBJECT TO
LIGHTNING STRIKES.
WARNING: THE SOCKET OUTLET, IF USED, SHALL BE LOCATED NEAR
THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE BY THE USER.
WARNING: USE MITEL APPROVED POWER ADAPTER PART NUMBER
50006814, 50006822, 50006824, OR 51301151. ALTERNATIVELY, IF
POWER OVER THE LAN IS AVAILABLE, IT SHALL BE COMPLIANT WITH
IEEE 802.3af.
WARNING: USE ONLY THE HANDSET PROVIDED WITH YOUR IP
PHONE. USE OF ANY OTHER HANDSET WITH YOUR IP PHONE MAY
HAVE THE POTENTIAL TO CAUSE HEARING LOSS IN THE EVENT OF A
LIGHTNING STRIKE ON THE OUTSIDE PLANT WIRING. THIS
PRODUCT'S HANDSET EARCAP REGION IS SLIGHTLY MAGNETIC AND
MAY PICK UP SMALL METALLIC OBJECTS, SUCH AS 26/6 GAUGE
STAPLES. PLEASE CHECK THE EARCAP REGION FOR METALLIC
OBJECTS BEFORE USE.
When using your phone equipment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and injury to persons, including
the following:
• Do not use this product near water, for example, near a bath tub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a swimming
pool.
• Avoid using a phone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
• Do not use the phone to report a gas leak in the vicinity of a leak.
Maintenance and Repair: There are no user serviceable parts inside the
phones. For repairs, return the phone to an authorized Mitel dealer.
These notices may appear on the product or in the technical documentation:
Danger indicates an imminently hazardous situation which, if not avoided,
DANGER
will result in death or serious injury.
Warning indicates a potentially hazardous situation which, if not avoided,
WARNING
could result in death or serious injury.
Caution indicates a potentially hazardous situation which, if not avoided,
CAUTION
may result in minor or moderate injury and/or damage to the equipment
or property.
This symbol may appear on the product:
The exclamation point within an equilateral triangle indicates that important
!
operating and maintenance (servicing) instructions are included in the literature
accompanying the product.
2
Description
Part of the new-generation desktop family, the Mitel 6915 IP phone
demonstrates Mitel's commitment to ease of use and enhanced user value,
while delivering innovative features and applications. A full-feature enterprise-
class telephone, the Mitel 6915 IP phone provides a large color backlit graphics
display with 6 programmable and four context sensitive softkeys.
This applications phone also features superior sound quality with wideband
audio, an enhanced speakerphone that utilizes advanced audio processing to
achieve richer and clearer handsfree conversations, and native analog, DHSG/
EHS, and USB headset functionality.
Accommodating today's high speed networks through dual Gigabit Ethernet
ports, the Mitel 6915 IP phone also offers plenty of support for Mitel and third-
party peripherals and has an environmentally efficient PoE class 2 rating. The
Mitel 6915 IP phone is one of the most advanced desktop IP phones available on
the market today and is ideal for enterprise executives, managers, and
employees.
The Mitel 6915 IP phone is compatible with select Mitel communication solutions
and supports both MiNet and SIP protocols through appropriate firmware
installation. The 6900/6900w series phones have MiNet firmware pre-installed.
For SIP deployments, upgrade to the latest SIP firmware release.
Phone Features
• 3.5" 320x240 color display
• Built-in-two-port, 10/100/1000 Gigabit Ethernet switch
• USB 2.0 port (100mA maximum)
• Wideband handset
• Enhanced wideband, full-duplex speakerphone for handsfree calls
• Extensive support for peripherals and modules: USB, DHSG/EHS, and
wired analog headsets, and Mitel Wireless LAN Adapter
• AC power adapter (sold separately)
• Six programmable (with a maximum of 2 pages), multi-function top
softkeys and four context-sensitive bottom softkeys
Supporting Documentation
To access phone and system-specific documentation:
1. Access document within Mitel Document Centre at
document-center.
2. Click Devices and Accessories.
3. Navigate through
IP Phones
4. Select the required document.
Requirements
• Mitel communications platform using MiVoice 5000 Release 6.4
(or later), MiVoice MX-ONE Release 6.3 (or later), MiVoice 400 Release
5.0 (or later).
• Access to a File Transfer Protocol (FTP), Trivial File Transfer Protocol
(TFTP), Hyper Text Transfer Protocol (HTTP) server or Hyper Text Transfer
Protocol over Secure Sockets Layer (SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000
Mbps] recommended for Gigabit Ethernet compliant phones).
• Category 5/5e straight-through cabling (Category 6 straight-through
cabling required for optimum Gigabit Ethernet performance).
• For Ethernet networks that supply inline power to the phone (IEEE 802.3af)
use an Ethernet cable to connect from the phone directly to the network for
power (no 48V AC power adapter required if using Power-over-Ethernet
[PoE]).
• For Ethernet networks that DO NOT supply power to the phone use only
the Mitel approved power adapter to connect from the DC power port on
the phone to a power source or use a PoE power injector or a PoE switch.
https://www.mitel.com/
>
6900 Series
>
6900 SIP
Phones.