MIRKA 1242 M Mode D'emploi page 85

2.3 Spare parts and accessories
CAUTION
Spare parts and accessories.
The use of non-genuine spare parts, brushes and accessories can impair the safety and/or function of the appliance .
Only use original spare parts and accessories from Mirka . Spare parts that can affect the health and safety of the
operator and/or function of the appliance, are specified below .
Description
Filter element
Fleece filter bag (5 pcs)
Disposal bag (5 pcs)
Motor cooling filter
Motor cooling filter PET
Case fastening accessory
Pneumatic box 230 V EU
Pneumatic box 230 V UK
Handle for Dust Extractor
2.4 In explosive or inflammable atmosphere
CAUTION
This machine is not suitable for use in explosive or inflammable atmospheres or where such atmospheres are likely to
be produced by the presence of volatile liquid or inflammable gas or vapour .
3. Control / Operation
CAUTION
Damage due to unsuitable mains voltage . The appliance can be damaged as a result of being connected to an
unsuitable mains voltage .
• Ensure that the voltage shown on the rating plate corresponds to the voltage of the local mains power supply .
3.1 Starting and operating the machine
Check that the electrical switch is switched off (in position 0) . Check that suitable filters are installed in the machine .
Then connect the suction hose into the suction inlet on the machine by pushing the hose forward until it fits firmly
into the inlet . When used for dust extraction together with a dust-producing tool, connect the end of the suction hose
using an appropriate adapter . Connect the plug into a proper electrical outlet . Put the electrical switch into position I in
order to start the motor .
Turn to I: Activate the dust extractor .
Turn clockwise for speed control .
Turn to 0: Stop the dust extractor .
Turn to sander: Activate Auto-On/Off .
Operation – turn counter-clockwise for speed control .
Mirka code
8999100411
8999100211
8999110311
8999110111
8999110211
8999110411
8999101011
8999101011UK
8999299111
Mirka® Dust Extractor • 1230 M & 1242 M • 230 V / 100–120 V • PC & AFC
en
[original instruction]
85