MIRKA 1242 M Mode D'emploi page 89

5. Maintenance
5.1 Regular servicing and inspection
Regular servicing and inspection of your machine must be carried out by suitably qualified personnel in accordance
with relevant legislation and regulations . In particular, electrical tests for earth continuity, insulation resistance, and
condition of the flexible cord should be carried out frequently .
In the event of any defect, the machine MUST be withdrawn from service, completely checked and repaired by an
authorized service technician . At least once a year, a Mirka technician or an instructed person must perform a technical
inspection including filters, air tightness and control mechanisms .
5.2 Maintenance
Remove the plug from the socket before performing maintenance . Before using the machine make sure that the
frequency and voltage shown on the rating plate correspond with the mains voltage .
The machine is designed for continuous heavy work . Depending on the number of running hours – the dust filter
should be renewed . Keep the machine clean with a dry cloth, and a small amount of spray polish .
During maintenance and cleaning, handle the machine in such a manner that there is no danger to maintenance staff
or other persons . In the maintenance area:
• Use filtered compulsory ventilation .
• Wear protective clothing .
• Clean the maintenance area so that no harmful substances get into the surroundings .
During maintenance and repair work all contaminated parts that cannot be cleaned satisfactorily must be:
• Packed in well-sealed bags .
• Disposed of in a manner that complies with valid regulations for such waste removal .
For details of after sales service, contact your dealer or Mirka service representative responsible for your country . See
reverse of this document .
6. Further information
6.1 Declaration of conformity
We hereby declare that the machine described below complies with the relevant basic safety and health
requirements of the EU Directives, both in its basic design and construction as well as in the version put into
circulation by us . This declaration is not valid if the machine is modified without our prior approval .
Product: Mirka® Dust Extractor
Type: 1230 M & 1242 M
Relevant EU directives: Machinery Directive 2006/42/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU
+ 2015/863/EU
Applied standards: EN 60335-1:2012 + A11:2014, EN 60335-2-69:2012, EN 55014-1:2017, EN 55014-2:2015,
EN 61000-3-2:2014, EN 61000-3-3:2013, EN 50581:2012
Authorized documentation representative:
Jeppo 29.09.2020
Place and date of issue
Manufacturer / Supplier: Mirka Ltd, Pensalavägen 210, 66850 Jeppo, Finland
Tel . +358 20 760 2111 • Fax +358 20 760 2290 • www .mirka .com
Company
Mirka® Dust Extractor • 1230 M & 1242 M • 230 V / 100–120 V • PC & AFC
Stefan Sjöberg, CEO
en
[original instruction]
89