Waldmann ABLL 1 Mode D'emploi page 26

GB Instructions for use Machine light ABLL 1
Operation
Fig. 15
max. 20°
max. 20°
26
NOTICE
Damage caused by turning the
light by force!
Turning the light by force will ex-
pand the internal spring and reduce
the self-retention of the ball joint.
¾ Do not turn the light axially!
Positioning
The light can be swiveled in any
direction by about 20°.
The light module is held in the set
position by the ball joint. To change
the position, simply swivel the light
module into the desired direction.
Switching ON/OFF
The light is not equipped with
a switch of its own. It is usual-
ly switched on/off via external
switching elements.
Important information
Install the switch always in the
primary electric circuit (see fig. 14
on page 25)!