Safety Regulations - Nitty-Gritty TIG.CLINOX EVO Manuel D'utilisation

ENGLISH
Read carefully this operating manual before any operation.
This manual contains information concerning storage, transport, installation, use, supervision and maintenance of
the machine.
This manual is an integral part of the machine and must be kept throughout the entire service life of the same for
future consultation.
The official language selected by the Manufacturer is Italian. The Manufacturer is not liable for translations into
other languages which do not accurately render the meaning of the Italian original.
This manual reflects the state-of-the-art at the moment the machine was supplied and cannot be considered
inadequate if there have been subsequent modifications according to further experience.
N -G
ITTY RITTY
all the marketing and using information.
P
REVENTION OF BURNS
During the
components involved in the process and the
torch can reach temperatures (higher than
180° C).
Special protective gloves must be used
when you handle the stainless steel
work pieces and during the use of the
torch. Similar precautions must be followed
in order to replace the special pads and the
inserts.
E
LECTROLYTIC SOLUTIONS
To operate this machine you have to use
electrolytic solutions called BOMAR, these
products are corrosive or irritating for eyes
or skin.
Adequate protective devices, such as
gloves, goggles and safety clothes,
must be worn during the use of the
machine
contact.
Do not use products which are different
from the ones stated in this operating
manual (in case of use of other products
any guarantee
moreover do not mix them with other
products. Keep the electrolytes in a safe
place and in the original container.
In case of accidental contact with eyes
or skin or ingestion, please follow the
instructions stated on the safety data
sheets of the products. It is possible to
require a copy of safety data sheet to:
N -G
ITTY RITTY
Tel: +39 059 785210
E-mail: info@nitty-gritty.it
The machine is constructed in compliance with established EU safety standards and bears the CE mark.
C A D
USTOMER SSISTANCE
work-process both
in order to avoid direct
will be invalidated)
S. . .
R L
- EN -
Warning
(info@nitty-gritty.it) is at your disposal to provide to provide
EPARTMENT
S
AFETY REGULATIONS
the
- 27 -
T
OXIC FUMES
Usually toxic fumes are generated during
the work processes: take precautions to
prevent exposure of the operator or other
persons.
The machine is equipped
integrated fumes aspiration system,
which starts automatically when the
machine is switched on.
The fumes are conveyed into the machine
and evacuated at the rear side. If using the
machine in confined or poor ventilated
areas such as tanks, silos, tubs, etc., use a
flexible hose or an extraction hood next to
the fumes outlet to convey the fumes to the
exterior.
E
LECTRIC SHOCK
All electric shocks are potentially lethal. Do
not use the machine in humid places.
Never touch the live areas. Even in case of
a light feeling of electric shock, stop the
cleaning operations and do not use the unit
until the problem is found and solved by
qualified personnel. Frequently check the
feeding cable; if damage or cracking of the
protective covering of the supply cable are
found, replace it immediately.
maintenance of the
components must be performed only
after disconnecting the unit.
Any maintenance of electrical components
must be performed only by qualified
personnel.
Always replace any damaged parts of the
unit with original spare parts.
with a
The
electrical