ADE M3200000 Guide D'utilisation page 32

8.4 Faults and error messages
8.4.1 Faults
Fault
The display shows
nothing.
The display shows
nothing.
The display shows
nothing.
The display shows
nothing.
The display shows
nothing.
The display indication
shows cryptic characters.
The scale wobbles.
8.4.2 Error messages
Error message
[Lo]
[uLoad]
[oLoad]
[no 0.00]
8.5 Maintenance
To ensure correct measurement, maintenance and repair should only be carried out
by authorised personnel.
To prevent the intended level of accuracy the product must be set up carefully and services
regularly. We recommend having it serviced every 3 to 5 years depending on how often the scales
are used.
Page 32 of 116
Cause
The scale has switched off
automatically.
The main switch is not switched
on.
Not connected to the mains.
The battery is empty.
No battery is inserted.
The display is in "Turning mode".
The scale is not levelled properly.
Description
Empty battery.
Underload (-20d)
Overload (-9d)
No zero point available.
Measure
"Tap" or switch on the scale.
Switch on the main switch.
Use the optional mains adapter to
connect the scale to the mains.
Insert new batteries.
Insert batteries.
Press the Turning key.
Adjust the support feet. Use the
spirit level to check the horizontal
position.
Troubleshooting
Insert new batteries.
Use the scale in mains operation.
Switch the scale off and on again.
Unload the scale. Zero range or
weighing capacity exceeded
Zero the scale.
M320000-210429-Rev004-UM-en