Hürner CNC ECO 1000 2.0 Manuel Utilisateur page 40

• The welder has to make sure that only one person is
present in the work zone where the system is operating.
When transporting the system, the facing tool and
the heating element have to be placed into the pro-
vided carrying rack at all times.
Important
The dust cap for the data communications interface
port has to cover the port during operation, in or-
der to keep humidity and contaminations away.
Important
2.5 Intended Use
The welding system is intended exclusively for joining plas-
tic pipes and fittings according to the butt-welding process
with heating element. See Section 3 for an overview of the
welding process enabled by this system.
The notion of intended use also includes:
• Compliance with the instructions in the User's Manual
• Observation of all service and maintenance intervals
All uses other than the ones mentioned above are
unacceptable and will cancel any and all liability or
warranty assumed by the manufacturer. Unintend-
Important
ed use may cause considerable hazards and material
damage.
2.6 Required Worksite Conditions
• The conditions have to fully ensure that the system can-
not slide.
• Worksite access limitations have to be provided. Appro-
priate equipment to achieve this can be ordered with
the manufacturer.
• The product must never be used if there are foreign
bodies or objects in the work area; in particular, it must
not be started if anything obstructs the smooth move-
ment of any movable part or component of the system.
2.7 Warranty
Warranty claims may be raised only if the conditions for
warranty given in the General Terms and Conditions of Sale
and Delivery obtain.
2.8 Transport and Storage
When the product is transported or stored, the hydraulic
tubing should not be detached and not squeezed either.
For transporting the pipe facing tool and the heating ele-
ment, use the provided carrying rack at all times and nev-
8
EN
HÜRNER CNC ECO 1000 2.0 User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Version October 2021