Black & Decker BD200TMT Manuel D'instructions page 6

Intended Use
Detail Sanding
Sanding in extremely tight areas otherwise difficult to reach and require hand sanding.
Select a high oscillating frequency. Sand with continuous motion and light pressure.
Applying excessive pressure does not increase material removal; but will prematurely
wear sanding sheets.
flush Cutting
Remove excess wood from door jamb, window sill and/or toe kick. Removing excess
copper or PVC pipe.
Removal Work
Carpets & backing, old tile adhesives, caulking on masonry, wood and other surfaces.
Removal of excess Materials
Tile grout, plaster, mortar splatters, concrete on tiles, sills.
Preparation of Surfaces
New floors and tiles.
functional Description
A) On/Off switch
B) Variable speed dial
C) Power cord
D) Clamp washer
E) Bolt
F) Hex wrench
BD200TMT
A
BD200MT
A
Assembly (BD200TMT)
WARNINg:
assembly, adjustments or changing accessories. Such preventive safety measures
reduce the risk of starting the tool accidentally.
WARNINg:
immediately after operating the tool. They can become very hot. Handle carefully.
Always allow workpiece and accessories to cool before handling.
SAve TheSe INSTRUCTIONS
G
Disconnect the plug from the power source before making any
Risk of lacerations or burns. Do not touch workpiece or blade
BD200MT Only
G) Tool-free release
H) Adaptor plate
I) Press board
J) O-ring
B
C
B
C
6
E
D
F
I
H
J