Publicité
Les langues disponibles
Les langues disponibles
Problem
• Unit will not start.
working
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
Accessories
Recommended accessories for use with your tool are listed on page 12 and 13 and
are available from your local dealer or authorized service center. In addition to Black &
®
Decker
accessories, your oscillating tool will also accept Porter Cable
®
FatMax
oscillating tool accessories. If you need assistance regarding accessories,
please call: 1-800-544-6986.
WARNINg:
The use of any accessory not recommended for use with this tool could
be hazardous.
Service Information
All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow page directory under
"Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com
Troubleshooting
Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
10
Possible Solution
• Plug tool into an
outlet.
• Replace circuit fuse. (If
the product repeatedly
causes the circuit fuse to
blow, discontinue use
immediately and have
it serviced at a Black &
Decker service center or
authorized servicer.)
• Reset circuit breaker.
(If the product
repeatedly causes the
circuit breaker to trip,
discontinue use
immediately and have
it serviced at a Black &
Decker service center or
authorized servicer.)
• Have cord or switch
replaced at a Black &
Decker service center or
authorized servicer.)
®
and Stanley
Publicité
