Publicité
Les langues disponibles
Les langues disponibles
5. MECHANICAL INSTALLATION
Herewith you start mechanical installation of the gate operator.
5.1 Dimensions of Gate and Operator
AA250EVK
265 mm
Example installation
A
min. 420 mm
5.2 Determine the Position of the Post Bracket
1. Determine the A, B and C dimensions based on the opening angle provided in Table 1 to confirm the position where the post bracket will be mounted.
NOTE: All crushing points must be secured by an entrapment protection according to EU: EN 12453, EN 60335-2-103; GB (UK, NI): BS EN 12453, BS EN 60335-2-103.
Operator Arm Mounting
1. Attach the motor arm to the center of the opener from
the underside.
2. Secure the caps with the screw and washer.
175 mm
B
max. 120°
Table 1
Opening angle
90°
120°
A
B
mm
150-300
390-540
300-350
300-350
Picture 1
13 mm
5
AA250EVK
1.5 m
250 kg
2.0 m
200 kg
2.5 m
150 kg
Ø 8.5 mm
96 mm
159 mm
Ø 8.5 mm
60 mm
100 mm
C
0-300
0-25
Publicité
