Cleaning The Normal Suction Nozzle; Cleaning The Brush Suction Nozzle - Blaupunkt Bluebot XSMART Manuel D'utilisation

8.7

Cleaning the normal suction nozzle

To clean the normal suction nozzle, do the following:
1. Make sure the power switch is off and the robot is not in Stand-by or in
Sleep mode.
2. Rinse the suction nozzle with water.
8.8

Cleaning the brush suction nozzle

To clean the brush suction nozzle, do the following:
1. Make sure the power switch is off and the robot is not in Stand-by or in
Sleep mode.
2. Take out and disassemble the roller brush kit and clean it with a soft
cleaning cloth or tool. The roller brush axle can be washed with water.
EN
73