Cleaning The Sensors And Wheels - Blaupunkt Bluebot XSMART Manuel D'utilisation

7. Wash the dust bin with water and clean the HEPA filter
with a brush. Let the primary filter air dry.
1 CAUTION
Do not dry the primary filter and HEPA filter in direct sunlight.
8. Insert the primary filter and HEPA filter in the dust bin.
Make sure the primary filter is fully dry.
8.4

Cleaning the sensors and wheels

To clean the sensors and wheels, do the following:
1. Make sure the power switch is off and the robot is not in Stand-by or in
Sleep mode.
2. Slightly wipe all the sensors and wheels with a soft cleaning cloth or
tool.
1 CAUTION
Do not clean the sensors and wheels with water. This could damage the
robot.
EN
71