Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL DATA
Cutting length mm
Space between teeth
Speed min-1
Weight
Battery LITHIUM ref « BAT18VLI »
Voltage
Capacity
autonomy
Charger for « BAT18VLI »
Entry
AC 100-240V, 50/60Hz, 190Ma
Output
Charging time
Class of protection
Values of noise emissions measured by the
standard:
Acoustic pressure level LpA
78 dB(A) K = 3 dB(A)
Acoustic power level LwA
91.7 dB(A) K = 3 dB(A)
Guaranteed sound power
2000/14/EC :
LwA 95dB(A)
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
EN ISO 8662-1
to relevant standard.
Main handle 3.415 m / s ²
Auxiliary handle 2.99 m / s ²
K= 1.5 m/²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
410
12
1400
2.7 kg
18V
1.3Ah
25min
DC 21V, 300mA
3~5h
ATTENTION !
must be worn.
:
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-
sales service department.
_ If replacing the power cord is necessary, it
should be done by the manufacturer or
his agent to avoid a hazard.
AFTER-SALES SERVICE AND
APPLICATION SERVICE
Our after-sales service responds to your questions
concerning maintenance and repair of your product
as well as spare parts. Exploded views and
information on spare parts can also be found
under:www.eco-repa.com
ELEM GARDEN TECHNIC application service team
will gladly answer questions concerning our
products and their accessories : sav@eco-repa.com
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable and
secure position, in a cool and dry place, avoid too
high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it
in the dark, if possible.
_ Don't keep it in plastic bags to avoid humidity
build-up.
Battery storage
_ Store and charge your batteries in cool area.
Temperatures below 10 ° C (50 ° F) or above
38 ° C (100 ° F) will shorten battery life.
_ Never store batteries in discharged condition.
Recharge them immediately after they are
discharged.
_ Batteries gradually lose their charge, the higher
the temperature the quicker, so If you store your tool
for longer periods of time without using it, recharge
the batteries every month or two. This will prolong
battery life.
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your machine need
replacement after extended use,
do not put it in the domestic
waste but dispose of it in an
environmentally safe way
28
Publicité
