RIB ACG6154 Mode D'emploi page 29

MASTER NO TOUCH 868 CONNECTIONS TO A CONTROL PANEL WITHOUT AN OUTPUT TO SUPPLY A BLINKER
FOR CONTROL PANEL ABLE TO MANAGE A 12/24Vdc MOTOR
- It is not possible to connect directly MASTER NO TOUCH 868 to the motor power supply output of the control panel because polarities are exchanged in opening and closing
and control panel has slow speed in approaching which is not possible to disengage.
* R1 = RELAY WITH 1 CONTACT AND 120/230Vac BOBINE
CONNECT J4 TO ACCESSORIES POWER SUPPLY LINE 12/24V ON CONTROL
PANEL THOUGHT 1 CONTACT RELAY WITH 12/24V BOBINE MANAGED BY A N.O.
COURTESY LIGHT OUTPUT CLEAN CONTACT ON CONTROL PANEL
* R1 = RELAY WITH 1 CONTACT AND 12/24V
BOBINE
+ -
24Vdc COURTESY LIGHT POWER SUPPLY
OUTPUTS TERMINAL BLOCKS ON CONTROL
PANEL
CONNECT J2 TO POWER SUPPLY LINE 120/230V ON
CONTROL PANEL THOUGHT 1 CONTACT RELAY WITH
120/230V BOBINE MANAGED BY A N.O. COURTESY LIGHT
OUTPUT CLEAN CONTACT ON CONTROL PANEL
*R1
*R1 N.O. N.O.
COURTESY LIGHT
TERMINAL BLOCKS
N.O. CLEAN CONTACT
ON CONTROL PANEL
29
N.O.
N.O.
F
POWER SUPPLY LINE
N
120/230Vac
-
+
ACCESSORIES
POWER SUPPLY
12/24V
TERMINAL BLOCKS
ON CONTROL PANEL
G
B