Télécharger Imprimer la page

Whirlpool ZET1 Instructions D'installation page 3

Publicité

Les langues disponibles

Les langues disponibles

Installation Instructions
Pre-lnstallation Checklist
ALL INSTALLATION
INFORMATION
ON THE FOLLOWING
PAGES IS TO
BE USED FOR SINGLE AND DOUBLE
OVEN INSTALLATION!
Remove packaging materials.
Check behind hinges and under
false bottom. Remove labels on the
outside of the door, plastic on trims
and panel, all tape around the oven,
and any shipping screws securing
the oven to the base pad.
J ........................................................
_L
Rack Supports
_'
_
with Hex Nuts
G
Temperature
Probe
Oven Racks
, _._.._,_
_
_
GraphiteLubricant
Broiler Pan
and Grid
Literature
Pack
Open oven door and remove
literature pack, broiler pan and grid,
oven racks, rack supports and a bag
with 9 hex nuts.
Read Installation Instructions carefully
before you begin.
Be sure to place all literature, Owner's
Manual, Installations, etc., in a safe
place for future reference.
To Remove the Door (if necessary)
Door removal is not a requirement
for
installation of the product, but is an
added convenience.
To remove the door:
[_
Open the oven door as far as it will go.
Hinge
Push both hinge
t--
Unlocked
locks down toward
_
Position
the door frame,
Hinge/_/'_._-_
/
to the unlocked
s_ot __
position. This may
require a flat-blade
H_nge
screwdriver.
Arm
DO NOT LIFT THE DOOR
BY THE HANDLE!
Place hands on both sides_
of the door, and close the
oven door to the removal
position, which is most of
the way closed.
Removal Position
[_
Lift door up and out
1l
until the hinge arms
clear the slots.
Hinge Clears Slot
NOTE: The oven door is very heavy. Be sure
you have a firm grip before lifting the oven
door off the hinges. Use caution once the
door is removed. Do not lay the door on its
handle. This could cause dents or scratches.
Place the oven on a table or platform
even with the cutout opening.
(Platform
must support
175 Ibs. [79 kg] single,
350 Ibs. [159 kg] double.)
Remove the bottom trim from the top
of the oven. It will be installed at the
end of the installation
process, The
trim is wrapped
separately
and taped
to the top of the unit,

Publicité

loading

Ce manuel est également adapté pour:

Zet2