Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Installation
Instructions
30" (76.2 cm) Built-In
Wall Oven
ZET1,ZET2
If you have questions, call 1.800.GE.CARES
or visit our website at:
ge.com
Before You Begin
Read these instructions carefully and completely.
• IMPORTANT-save
these
instructions
for local inspector's
use.
• IMPORTANT-observe all
governing
codes and ordinances.
• Note to Installer--Be
sure to leave these
instructions
with the consumer.
• Note to Consumer--Keep
these
instructions
for future
reference.
• Proper installation
is the responsibility
of the installer
and product
failure
due
to improper
installation
is NOT covered
under warranty.
• NOTE--This
appliance
must be properly
grounded.
• ATTENTION INSTALLER
All electric wall ovens must be hard wired
(direct wired)
into an approved junction
box. A plug and receptacle
is NOT permitted
on these products.
Parts Included
(Appearance may vary.)
3/4" Wood
Screws
(8-18 x .750 flat-head
5/8" Wood
Screws
(8A8 x .625 truss-head
Phillips wood screws)
Phillips w_
I_ __-___-
Metai.B°tt°m
Trim Assembly
31-10649
02-07 JR
Materials Needed
Strain Relief Clamp
Junction
for 1/2" conduit
Box
Wire Nuts
36" (91 cm)
of String
Tools Needed
1/8" Drill Bit and
Electric or Hand Drill
Phillips
Screwdriver
Adjustable Wrench

Publicité

loading

Ce manuel est également adapté pour:

Zet2