Toro 23126 Mode D'emploi page 7

1. Small bolt (2)
2. Small washer (4)
3. Nut (10)
2. Connect the traction unit receiver plate to the backhoe quick-attach plate and engage the quick-attach
pins; refer to the traction unit Operator's Manual.
3. Install a tie-down link as shown in
4. Repeat step 3 on the other side of the machine.
Figure 3
4. Large washer (24)
5. Spacer (8)
6. Large bolt (8)
Figure 4. Secure the tie-down link with 2 pin locks.
5
g378752