Toro 23126 Mode D'emploi page 4

1
Preparing the Machine
No Parts Required
Procedure
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Lower the loader arms.
4. Shut off the engine, remove the key, and allow the machine to cool.
5. Open the rear-access cover and engine hood.
6. Turn the battery-disconnect switch to the O
7. Remove the cover plate by removing the 3 bolts holding it in place
Note:
Retain the cover plate and corresponding bolts for later installation.
1. Cover plate
position.
FF
Figure 1
2
(Figure 1).
g355550