Controls And Display - SEVERIN FRD 8994 Mode D'emploi

Controls and Display

The control is carried out by push buttons
under the display on the outside of the cold
storage door. If the refrigerator doors are
closed and no button is touched within 3
minutes, the display illumination turns off.
• The inverter symbol always lights up as
long as the compressor is operating.
• Key lock
The device is equipped with an automat-
ic key lock. To change the settings, first
press the button
changes are made to the display for three
minutes, the key lock is reactivated.
1
2
3
4
5
6
7
12
11
10
1 Display for
2
3
4
5
6
7
8 Button for
selection
9
10
11
12
for three seconds. If no
8
9
Temperaturezone
Fridge
Temperaturezone
Freezer
Temperature
Inverter
FastFreeze-Mode
Vacation-Mode
Smart-Mode (Energy
Saving)
Temperature
OK
Key lock
Function
Temperature zone
Regulate the Temperature in the Cooling Room
Tap the button 'TempZone'. If the display for
the cooling temperature blinks, then every
tap on 'Temp' changes the temperature by
one degree between 2 °C and 8 °C. If you
tap again at the setting of 8 °C, then 'OF'
illuminates and the cooling for this part of the
appliance is turned off.
VeggiBox
The VeggiBox serves as the optimal storage
for fruits and vegetables.
Regulate the Temperature in the Freezer
Tap on the button 'TempZone'. If the display
for the freezer temperature blinks, then every
tap on 'Temp' changes the temperature by
one degree between –24 °C and –16 °C.
Special Features
Tap if necessary several times on 'Function'
and subsequently on 'OK', in order to activate
the following special features. To deactivate a
special feature, tap the 'Function' button until
the symbol of the desired function gets illu-
minated. Then, hit 'OK'. The symbol lighting
goes out.
Fast Freezing
This setting fixes the freezer temperature for 26
hours at –32 °C. This temperature cannot be
changed until the function is deactivated. After
26 hours, the appliance will freeze again at
the preset temperature.
Vacation
This setting fixes the cooling temperature at
14 °C, and it cannot be changed until the
function is deactivated. The freezer tempera-
ture remains unaffected.
After 5 seconds without further input, the
blinking stops, and the respective function
will be taken over.
SMART
This setting fixes the cooling temperature
at 5 °C and the freezer temperature -18 °C.
These temperatures cannot be changed until
the function is deactivated.
After 5 seconds without further input, the
blinking stops, and the respective function
will be taken over.
- 21 -