Bartscher FTH - 30 Notice D'installation Et D'emploi page 3

DECLARATION OF A STANDARDS CONFORMITY
The producer confi rms that the devices agree with CEE 90/396 standards, rule nr. 22/1997 sb. and with relevant
goverment orders. Instalation must be done with respect to valid standards. Attention, the producer refuses
any responsibility in case of direct or indirect damages which are caused due to wrong instalation, incorrect
intervention or modifi cation, insuffi cient maintenance, incorrect use and also possibly caused by other reasons
presented by items in sale conditions. This appliance is set only for skilled use and must be operated by qualifi ed
persons only. Parts set and secured by the producer or accredited person must not be rebuilt by user.
TECHNICAL DATA
Label with technical data is placed on the back side of the device. Study the electrical diagram of connection and
all following information before instalation.
MODEL VOLTAGE (V/HZ)
FTH - 30
FTR - 30
FTH - 60 400 / 3N / 50
FTHR - 60 400 / 3N / 50
PACKING AND DEVICE CHECK
The device leaves our stocks properly packed with appropriate symbols and labels. There are also appropriate
instructions for use. In case the packing shows bad handling or damage, it must be reclaimed at transporter
immediately by writing and signing of a damage protocol.
Important notice:
• this instructing guide must be read properly and carefully because it contains important information about
safety elements, installation, use
• these recommendations refer to this product
• this product corresponds with valid standards
• this guide must be properly deposited for future use
• keep the children away from manipulation with the product
• when selling or moving the product to another place it is necessary to make yourself sure that the staff or the
professional service has got acquainted with control and installation instructions from enclosed guide,
• only authorised person can operate the product
• the device can be used only for grilling and baking food
• it cannot be switched on without supervision
• we recommend to have the product checked by professional service min. once a year
• only original spare parts can be used for repairs
• the product cannot be cleaned by the water jet or pressure shower
• by damage or break down disconnect all the feeders (water, gas, electricity) and call professional service
• producer refuses any responsibility in case of damages caused by wrong installation, by disobserving of above
mentioned recommendations or by other use etc.
TECHNICAL INSTRUCTIONS FOR INSTALATION AND REGULATION
Can be used ONLY by specialized technicians. following instructions apply to the technician specialized in
instalation to do all the operations in the most correct way and according to the valid standards.
WATTAGE (W)
230 / 50 2 900
230 / 50 2 900
5 800
5 800
TOP DIMENSIONS
DIMENSIONS (CM)
(CM)
32 x 48 33 x 53 x 22
32 x 48 33 x 53 x 22
66 x 53 66 x 53 x 22
66 x 53 66 x 53 x 22
3
WEIGHT (KG)
28
28
53
53