Starting The Pasta Making Program - Philips HR2345/17 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 64
Flour
All-purpose flour 200g
Durum (Semolina flour
150g + all-purpose flour
50g)*
* Use a kitchen scale to measure the weight more accurately.
Important
y The pasta recipes provided in the recipe book have been tested for success. If you
experiment with or use other pasta recipes, the flour and water/egg ratios will need
to be adjusted to the flour and water cup ratios included with the Pasta maker.
The Pasta maker will not operate successfully without adjusting the new recipe
accordingly.
Note
y For best results, use all-purpose flour with the recommended liquid proportions
indicated on the cup.
y Seasonal changes, using ingredients from different regions may affect the flour/water
ratio.
y "Gluten" is a binder which ensures the pasta does not break easily. Gluten-free flour
does not contain a binder, therefore it needs a thickener to act as a "binder" eg.
Xanthan gum or Guar. Various kinds of gluten-free flour perform differently when
making pasta. Some flours are not suitable for making pasta such as coconut flour
and white rice flour; some flour varieties work well, such as quinoa and buckwheat.
y See the recipe book provided for more delicious pasta and noodle ideas.

Starting the pasta making program

Important
y Do not select the extra extrusion program before the dough mixing is complete.
Otherwise, this will damage the Pasta maker and its lifetime.
y Do not disconnect the power cord before the processing is complete. If you have to
stop the pasta making process, turn the control knob to "OFF" to stop the working
process and then disconnect the power cord from outlet before performing other
operations.
y Do not exceed the maximum operation cycle of 2 cycles continuously at all
applications. To better protect the lifetime of the appliance, you can restart using
the appliance after 30 minutes upon 2 continuous operation cycles.
y If you intend to use the appliance continuously, clean each shaping disc with the
supplied cleaning tool each time after the pasta making session. For easy cleaning,
do not soak the shaping disc directly in water.
1 Put the plug of the appliance into the power outlet.
sound
once. (Fig. 30)
Note: Make sure all the parts are well assembled before plugging in.
2 Attach the lid onto the mixing chamber. (Fig. 19)
Spinach juice
Beet juice
(including 1
(including 1
egg) (ml)
egg) (ml)
85
85
Carrot juice
(including 1
egg) (ml)
85
85
85
85
The Pasta maker will give a signal
ENGLISH
13
Water
cup
Side B

Publicité

Table des Matières
loading

Table des Matières