Publicité
Les langues disponibles
Les langues disponibles
ALIGNMENT AND ADJUSTMENTS
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
TEST MODE
Power Off State
Special Test Mode
Power On State
(Normal User Mode)
Quick Test Mode
Definition of Quick Test Mode:
- Check operation of all LED's (Verify faulty LED).
- Check model and software version.
- Check different operating modes (e.g. water valve, motor, door, drain pump, etc.).
How to Enter:
- Plug in the unit.
- Press Soil Key, Spin Key and Power Key at the same Time.
[BingBang2] Technical_information_02830C-01_EN.indd 4
WARNING
Quick Test Mode
EEPROM Clear
Mode
Continuous Cycle
Mode
Service Mode
Quick Spin Test Mode
Cycle Count Check Mode
S/W Version Check Mode
Fast Time Down Test Mode
Demo Mode
Board Input Test Mode
Diagnostic Code
CheckMode
4
Test Mode:
Each Test Mode for the BIGBANG is as follows in
the coming pages. The test modes indicated by
the red arrows are modes unable to get an access
once the washing cycle has started due to safety
resons.
2012-10-05
3:26:48
Publicité
