Publicité
Les langues disponibles
Les langues disponibles
SWITCHING ON/OFF TEMPERATURE SELECTION(THERMOSTAT) (l)
The temperature control switches the appliance on and off and controls/sets the
cooling temperature.
To prevent temperature being accidentally modified, the control is intentionally
resistant to turning.
To vary the setting, we recommend using a coin or screwdriver.
To switch on: Turn the control (l) to the right adjust temperature to the level you
require, between:
- "1" (slight cooling) and
- "7" (lowest temperature)
To switch off: Turn the control to the left
Temperature settings must be according to:
- Ambient temperature of the appliance
- Quantity of stored foodstuff
- Frequency of opening
We recommend a medium setting. You will soon learn which is the most suitable
setting for your requirements.
INDICATOR-LIGHTS (M,N,O)
If your appliance is equipped with indicator-lights, the following guide explains what
is meant by each light up:
- Green = POWER
The appliance is under current and operating
The green power light must always be on when the appliance is connected to the
mains and switched on. It is very important to pay attention to this, because in the
event of a power failure, the red and yellow lights stop operating and do no longer
provide a warning.
- red = ALARM
Interior temperature too high
If the red indicator-light goes on, there may be several reasons for this, namely:
-26-
Publicité
