ECOFOREST DUBLIN II Manuel D'installation Et Maintenance page 36

Electrolytic sleeve.
Ventillation grills.
4.11. Do not install the stove in a sleeping room.
4.12. Install a fire protection between the ground and the stove if the floor is a combustible material.
4.13. Security distances should be respected when the stove is installed in spaces where materials around it, be it
the construction material itself, the fuel or any other type of materials, are likely to be flammable. Ensuring a
better access to the stove for future maintenance or repair work is also worth considering.
A Lateral wall.
Back of the stove. Minimum separation
B that allows visualizing the label
marking the stove.
C 1.5 x depth of stove.
D Shelf.
E Depth of stove.
q
640 mm.
w
860 mm.
e
≥ 590 mm.
r
Guide wheels for boiler fitting.
t
Bottom trim.
y
Wheels with brake.
u
Ventillation grill. OBLIGATORY
Ecoforest only guarantees the correct operation of the stove if the dimensions and the position of the
ventilation grids are respected.
4.14. Gas output must be located in a ventilated area, not in closed or half-closed areas e.g. garage, corridor, air
space of the house or places where gas may concentrate.
4.15. The external parts of the stove may reach high temperatures that might burn when touching; it is
recommended to use a non flammable grid to avoid risk of burn for children and old people.
RECOMMENDABLE
OBLIGATORY
LOCATION AND SAFETY DISTANCES.
≥ 80 mm
See dimensions
≥ 400 mm
See dimensions
PLACING THE DUBLIN II MODEL IN ITS ENVISAGED SPACE.
Effective area ≥
2
456 cm x 2 grills
SECURITY NORMS FOR GAS OUTPUT AND AIR INPUT.
• Depending on the material used for the hydraulic
circuit.
• Dublín II.
≥ E
35
Drawing 4
Drawing 5