6. Sewing sleeves
This sewing machine has been designed to sew sleeves or any narrow openings in garment. Pull out the
drawer and position the garment over the sewing arm if you want to sew the sleeves.
7. Manual buttonhole
1) Pull the cloth under the presser foot and lower the presser foot on the cloth where you need to sew
buttonhole, then choose the 15
2) Turn on the switch and sew 5-6 stitches in low speed, then turn off the switch (Fig.15).
th
3) Choose the 16
stitch, turn on switch and sew on the cloth in suitable length, then turn off switch. Note
that try to keep sewed stitches in straight line (Fig.16).
th
4) Choose the 15
stitch, then turn on switch and sew 5-6 stitches in low speed, then turn off switch (Fig.17).
5) Raise the presser foot, rotating the cloth for 180° (Fig.18).
th
6) Choose the 16
stitch, then turn on switch and sew till buttonhole is fully sewed (Fig.19).
Fig.15
Fig.18
Note:
The presser foot shown as below can facilitate the buttonhole sewing.
th
stitch.
Fig.16
Fig.19
- 9 -
Fig.17