Medisana RC 450 Mode D'emploi page 13

3.1 Functions
Shiatsu-Massage
0qt
Lower button (lower back)
The Shiatsu massage heads travel up and down the lower half of the back in
a circular motion. The reversal of the direction takes place when the respec-
tive end positions are reached.
Upper button (upper back)
The Shiatsu massage heads travel up and down the upper half of the back in
a circular motion. The reversal of the direction takes place when the respec-
tive end positions are reached.
Full button (full back)
The Shiatsu massage heads move from the "Park" position to the lower
back, massaging the back in a circular motion whilst doing so. Once the un-
dermost position has been reached, the direction of the massaging heads is
reversed and the heads then travel up to the top of the backrest. Once the
heads reach this point, the direction of rotation is reversed again and then
travel down the back again.
Press the button again to deactivate the Shiatsu massage function.
Spot massage button
z
Only under shiatsu state spot massage for back will response. Massage heads
rotate in a spot. Press button again to deactivate the spot massage function and
return to Shiatsu state.
FAST /SLOW button
rw
You can choose the speed of the massage with these two buttons: fast (+)
and slow (-).
Timer button
u
With the timer button , you can determine the length of the massage. Press
u
button , the button lights up and switches the timer to 5 minutes (the LED
u
"5" lights up). Pressing the button again switches the timer to 10 minutes (the
LED "10" lights up). Pressing the button once more switches the timer to 15
minutes (the LED "15" lights up).
4.1 Cleaning and maintenance
• Before cleaning the device, make sure that it is turned off and the
mains plug is removed from the socket. Allow the unit to cool down.
Only clean the Shiatsu massage seat cover with a soft cloth slightly
dampened with a mild detergent (e.g. soap suds).
• Under no circumstances should you use aggressive detergents,
strong brushes, solvents, petrol, thinners or alcohol. These could
damage the surface.
• When cleaning, never immerse the unit in water and make sure that
no water gets into the unit.
• Wait until the device is completely dry before using it again.
• Undo any kinks in the cable.
4.2 Disposal
This product must not be disposed of together with domestic
waste. All users are obliged to hand in all electrical or electron-
ic devices, regardless of whether or not they contain toxic sub-
stances, at a municipal or commercial collection point so that
they can be disposed of in an environmentally acceptable man-
ner. Consult your local authority or your supplier for information about
disposal.
4.3 Technical specifications
Name and model: medisana Swing Massage Chair RC 450
Power supply: Operation with mains adapter
Type: XZ1200-3000G
Input: 100-240V~ 50/60Hz 1A
Output: 12V
Power consumption: 36 W
Dimensions: approx. 67 x 90 x 107 cm
Weight: approx. 20 kg
Article no.: 88431
EAN no.: 40 15588 88431 3
Maximum capacity 150 kg
In accordance with our policy of continual product improvement,
we reserve the right to make technical and visual changes without notice.
The current version of this instruction manual can be found under www.medisana.com
3 Operating / 4 Miscellaneous
3A
GB
13