Perel Tools ELS3W Notice D'emploi page 4

•
Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord
by the plug only.
•
There may be some smoke or a particular smell when the device is activated for the first time.
This is normal and any smoke or smell will gradually disappear.
•
Do not use the device when damage to housing, protective glass or cables is noticed. Do not
attempt to service the device yourself but contact an authorised dealer.
4. Features
• Adjustable lamp angle
• Protective glass
• Aluminium casing
• IP44 rated
5. Installation
Refer to the illustrations on page 2 of this manual.
• This device must be connected directly to the mains (no socket) via the connection box (2),
maximum voltage 230V AC. The connection to the mains should be prepared and carried out by an
acknowledged professional.
• The device is designed to operate in a vertical position. Do not mount on a ceiling.
• Mount the device at a height between 2m and 4.5m. Keep at least 20 cm of free safety distance
above and left and right of the device.
6. Service
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.
7. Technical specifications
number of LEDs
light output
power
LED lifetime
max. voltage
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this user manual, please visit our website
www.perel.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder.
09/03/2010
ELS3W
45 x 0.066W
250 lm
3W
60.000h
230VAC
4
©
Velleman nv