DETAIL K2 MFT4X8G Manuel Du Propriétaire page 7

Lay the front bed (26) and rear bed (21) as shown. Note the location of the marker lights holes in the
front side rails. See fig.1
1. Use M10 x 20 hex head bolts and nuts (34) to mount the 8 stake pockets (40) to the trailer as
shown.
2. Use M10 x 20 hex head bolts and nuts (34) to mount the inside hinge (27) to the front bed (26) and
the outside hinge (28) to the rear bed (31);
3. Connect the two beds with M10 x 20 hex head bolts and nuts (34).
40
34
�ig.1
ASSEMBLY ASSEMBLY
STEP 1 STEP 1
BED ASSEMBLY
Item N
o.
34 Hex M10 x 20 & nut (set)
40 Stake pocket
28 Outside hinge
27 Inside hinge
34
27
40
Description
28
27
34
Qty.
28
8
2
2
40
28
34
40
34
7
v.230804