DETAIL K2 MFT4X8G Manuel Du Propriétaire page 22

SAFE USE AND OPERATION RULES SAFE USE AND OPERATION RULES
Step 4
Secure the sections together using a bungee or rope. Make sure the trailer cannot open
up while tipping onto castors for storage.
Step 5
Remove the wheel chocks from the trailer tires and tilt the trailer onto its casters (fig.11).
Make sure you get the assistance of 1 or 2 additional people. Do not try
this on your own.
Step 6
Be careful when transporting trailer on caster wheels. The trailer can tip if you
aren't careful balancing the weight.
Make sure you get the assistance of 1 or 2 additional people.
Step 7
The trailer is now ready to store against a wall. It is recommended you secure
the trailer to avoid any movement while stored.
z Check and maintain the trailer, coupler, ball and hitch before each use and
every 200 miles (322 km).
z Inspect coupler, hitch and ball for damage before each use.
z Ball or hitch can be damaged in parking, hitting curbs, dragging when
crossing ditches or railroad tracks.
z Check safety chains and hooks for wear and do not allow safety chains to drag on ground.
z To prevent bearing damage, disassemble and repack wheel bearing with a good grade of wheel
bearing grease every 2000-3000 miles (3200 - 4800 km) or yearly.
z If you do not know how to repack wheel bearing, take your trailer to a qualified technician.
IMPORTANT:
operation of your utility trailer.
1. the instructions carefully and follow them step-by-step for easy assembly. Please
PLEASE READ
keep this instruction.
2.
PLEASE DOUBLE CHECK THE ASSEMBLY
3.
BEFORE USING, PLEASE INSPECT
4.
DO NOT REMOVE THE VIN STICKER
22
MFT4X8G man
MAINTENANCE
The purpose of the following notices is to give you tips on safe use and
step-by-step to be sure each is followed.
your trailer.
from the tow bar.
�ig.11