Ezviz C6C FHD Guide De Démarrage Rapide page 14

1. Place drill template onto the surface you have chosen to mount the camera.
2. (For cement wall/ceiling only)
screws.
3. Use three metal screws to fix the camera base according to the template.
4. Install the camera on the base, and turn it 15° to secure it.
5. Connect the power cable to the camera. If the camera was previously connected to the Wi-Fi
network, it will automatically connect to the same Wi-Fi network.
Drill screw holes according to the template and insert three expansion
2
1
5