Publicité
Les langues disponibles
Les langues disponibles
3.1 CAPACITY AND SPECIFICATIONS OF THE TOOL
Capacity of the Tool
Model No.
Recommended work
(Bolt strength)
Torque control functioning
range
Workload and work speed
(with a fully charged pack)
Specifications of the Tool
Model No.
Wrench size
Motor voltage
No-load speed
Number of pulses
Overall length
Overall height
Dimensions
Overall width
Mass (Weight)
Wireless communication
USB connector specifications
Number of tool history logs
that can be saved (in [Stand
Alone Mode])
Number of tool parameters
that can be held (in [Stand
Alone Mode])
Charging time (when EY0L82B
battery charger used)
※
USB Type-C is a trademark of USB Implementers Forum.
EN
EYFNH1RC EYFNH1XC
EYFNH1RP EYFNH1XP
M12/M14 (high-strength bolt)
About 70 Nm to 220 Nm
<M12: 100 Nm / 890 In.lbs / 70 Ft.lbs>
500 bolts: About 1 s/bolt (EYFB50)
300 bolts: About 1 s/bolt (EYFB51)
EYFNH1RC
EYFNH1RP
0 to about 1900 rotations/minute
(The maximum speed can be set from about 1300 to 1900 rotations/minute.)
0 to about 2400 rotations/minute
About 265 mm (10-7/16˝)
EYFB50 used: About 294 mm (11-9/16˝)
EYFB51 used: About 278 mm (10-15/16˝)
(Maximum battery pack width: About 76 mm (3˝))
EYFB50 used: About 3.35 kg (7.4 lbs)
EYFB51 used: About 3.15 kg (6.9 lbs)
IEEE 802.15.4
About 47600 bolts (at 1.2 s work)
EYFB50; Charging for practical use: 65 minutes, Full charging: 80 minutes
EYFB51; Charging for practical use: 45 minutes, Full charging: 60 minutes
- 89 -
M16/M18 (ordinary bolt)
/ 620 In.lbs to 1950 In.lbs
/ 50 Ft.lbs to 160 Ft.lbs
□12.7 mm (1/2˝)
18 V DC
About 76 mm (3˝)
※
USB Type-C™
1 parameter
EYFNH1XC
EYFNH1XP
―
Publicité
